Instruments

Starta vadi

Booster cable 900A 6M 12 / 24V
- maximum cable power:900 A
- cable length with clamps - 6 m
- wire thickness with insulation - 11mm
- wire thickness without insulation - 7mm
- maximum opening of buckles - 35 mm
- convenient packaging

Stock: > 1 pcs.

Fuel transfer pump

Stock: 0 pcs.

Fuel transfer pump

Stock: 0 pcs.

Sūknis degvielas pārsūknēšanai

Pump for transfer fuel, electric, submersible, 12 V 51 mm.
Designed for quick transfer of fuel (diesel, gasoline, kerosene) and light oil products from storage tanks to various vehicles or other containers.
Technical data:
- Voltage 12V.
- Current: 3.5 A
- Pump diameter: 51 mm.
- Diameter of inlet/outlet pipe: 19/7 mm.
- Capacity: 30 l/min.

Stock: > 1 pcs.

Sūknis degvielas pārsūknēšanai

Submersible fuel pump.
- Voltage 12V.
- Diameter 38 mm.
- Flow rate 15 l/min when powered by 12 V DC.
- Equipped with a metal mesh filter.
The pump is designed for pumping diesel fuel, heating oil and other liquids of similar density.
Thanks to its reduced diameter, it is very convenient and easy to use when pumping liquids in cars, tractors, construction machines, combine harvesters, boats, etc.
A special metal mesh filter at the pump inlet (bottom) prevents the suction of elements that could damage the device and cause contamination of the liquid.

Stock: > 1 pcs.

Sūknis degvielas pārsūknēšanai

Submersible fuel pump.
- Voltage 24V.
- Diameter 50 mm.
- Flow rate 15 l/min when powered by 24 V DC.
- Equipped with a metal mesh filter.
The pump is designed for pumping diesel fuel, heating oil and other liquids of similar density.
A special metal mesh filter at the pump inlet (bottom) prevents the suction of elements that could damage the device and cause contamination of the liquid.

Stock: > 1 pcs.

Candle key

Trunk mat - especial made mat for each model using 3D floor scan technology.

Stock: > 1 pcs.

Teleskopiskā uzgriežņu atslēga

Telescopic wheel wrench TWW-17 / 19mm.
-Variable length: 34-55 cm.
- Non-slip handle.
- Size: 17/19 mm.
- Chromed steel - the vanadium used in the production of keys ensures high quality and durability.

Stock: > 1 pcs.

Teleskopiskā uzgriežņu atslēga

Telescopic wheel wrench.
- 2 interchangeable tips: 17-19mm and 21-23mm.
- Made from durable steel.
- Telescopic non-slip handle for easy handling.
- The handle can be extended up to 510 mm.

Stock: > 1 pcs.

Voltmeter

Accessory with decorative and practical effect for door, side window element. Designed to im

Stock: > 1 pcs.

Voltmeter

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor s

Stock: > 1 pcs.

Voltmeter

Designed to protect from mechanical damages and scratches. Creates an upcoming air streams f

Stock: > 1 pcs.

Testeris

Carpoint 0623408 Vehicle Current Tester 3 - 48V

Stock: > 1 pcs.

Testeris

Voltmeter 6-24V

Stock: 0 pcs.

Testeris

DC and AC voltage tester with LCD display, 12-250 V.
It is used to measure alternating voltage in the range of 12-250V with a frequency of 50-500Hz, to check the integrity of the cable and grounding.
Suitable for both professional electricians and occasional home use. The check is carried out by contact or induction method, i.e. when the tester approaches the installation being tested.
Specifications:
- LCD-screen displaying the results of measurements in the ranges up to 12, 24, 36, 55, 110 and 220 V.
- Additional LED signaling.
- Flat tip 2.9 mm wide - provides precise access to small elements.
- Power supply: 3 x LR41 (included)

Stock: > 1 pcs.

Testeris

Voltage detection tester, 6-24V.
The device is designed to determine the voltage in the electrical installations of vehicles with a voltage of 6/24V.
Inside the transparent handle is a light that lights up when voltage is detected.
The included alligator clip cable simplifies vehicle wiring troubleshooting and is used to quickly detect power failures in electrical systems, fuses, or lighting.
Technical data:
- Operating range: 6V-24V.
- retractable cord with crocodile clip.
- Material: plastic.
- Length: 120 mm.
Weight: 55g

Stock: > 1 pcs.

Testeris

Ignition system tester.
The device allows you to easily diagnose damage to the ignition coil and check the quality and strength of the spark plug.
The tester is connected between the high voltage cable and the spark plug.
Usage:
- With the engine off, remove the spark plug from the spark plug,
- Connect the tip of the tester to the spark plug,
- insert the metal tip of the tester into the ignition tube,
- start the engine.

Stock: > 1 pcs.

Universāla uzgriežņu atslēga

Multifunctional universal rotary key.
Product Features:
- Distance range from 8 to 19 mm - allows you to install all types of bolts and nuts.
- Specially designed wrench sockets automatically adjust to the size of the bolt or nut within the above range.
- Works at 45°, 60° and 90° angles (angle adjustable by screw).
- Two 360° rotatable heads, each with 4 holes - allows you to quickly switch between ranges.
- Triple toothing - allows you to insert and remove even damaged bolts and screws.
- Comfortable rubberized handle - increases grip and prevents fatigue and slipping of the hand.
- Material: metal and plastic.
- Key length: 25 cm.
- Key width: 5cm
- Distance: 8mm, 10mm, 11mm, 13mm, 14mm, 16mm, 17mm, 19mm.

Stock: > 1 pcs.

Universal tester

TMP02-G7G13
Universal tester TMP02-G7G13 allows to verify properlies operation of installed towbar kits (any producer). Device checks all signal's circuits for lighting lamps of trailer. Can be used with installations equipped with socket G13 or G7 (using adapter). Additionally is measured voltage on 'powered' pins.



Highlights of TMP02-G7G13:

device has build-in circuits of equivalent load what allows to verify operation 'under load',
very long (up to 5 meters) wire (from socket to the console) what makes possible to be inside car's cabin with console of tester in hand and to check all circuits/lights simple and fast,
is possible to simulate malfunction of bulbs for each directions lights and stop lights - like also completely disconnect all circuits,
is presented value of voltage for full G13 installation - and is signalled to switch on powering to the pins 9 and 10 ('permanent' and 'for charging').

Stock: 0 pcs.

Uzgaļu komplekts

KEY WRENCH SET 40 PCS
Manufactured by cold stamping.
Sets are complete with adapter socket from ½ to hex 10mm.
Hex: L=30 - Н4,Н5,Н6,Н7,Н8,Н10,Н12 , L=75 mm Н4, Н5, Н6, Н7, Н8, Н10, Н12.
Тогх®: L=30 mm:Т20, Т25, ТЗО, Т40, Т45, Т50, Т55 L=75 mm. - Т20, Т25, ТЗО, Т40, Т45, Т50, Т55.
SPLINE: L=30 mm - М5,М6,М8,М10,М12, L=75 mm — М5,М6,М8,М10,М12.
Material — tool steel S2.
Coating - phosphatizing.
Packaging - plastic case.

Stock: 0 pcs.