Auto chemicals

Order by:
 
 
Kategorijas filtri:
Car brand
Product Code Price Number
Vējstiklu koncentrēts šķidrums

Concentrated summer windshield fluid DR.WACK, 250 ml
It is a top quality product, very concentrated.
To obtain the finished windshield fluid, it is necessary to dilute with water in a ratio of up to 1: 200.
Convenient to use, its packaging takes up very little space, 50L of finished windshield fluid can be obtained from one 250ml bottle.
The product is environmentally friendly, all raw materials meet strict EU requirements, is not harmful to windshield and headlight washing systems, rubber, polycarbonate and body varnish coating.

Stock: > 1 pcs.

PTW-0250

Price: 8.00 €

Auto vasks

Original car wax, 500 ml, Turtle Wax

Easy-to-use car wax, which provides the so-called 'hard shell' effect. Wax is safe for all painted surfaces - both new and old, is a unique mixture of cleaners and waxes that removes dirt and soot, improves the appearance of your car, providing long-term protection against precipitation.

TURTLE TIPS: If the car paint has scratches and fine scratches, first use RENEW POLISH to remove them. The product will be difficult to use in direct sunlight or on hot paint. Do not use if the lacquer layer is damaged. Avoid contact with glass and trim.

USE:
1. Make sure the paint is clean and dry, shake the bottle well.
2. Treat the surface in parts, pour the wax on a clean cloth and apply it in a circular motion.
3. Allow to dry until spray forms, then wipe with a clean, soft cloth.
4. Apply a little to make the surface shiny.

Stock: > 1 pcs.

T51795

Price: 7.00 €

Car wash complect

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor s

Stock: 0 pcs.

61474

Price: 9.00 €

Auto šampūns

Prizma Shampoo 500ml
Description
Capacity: 500ml
Prizma car shampoo with wax, hand wash - concentrate.
Effectively and gently removes all types of dirt from the car body (oil stains, road salt residues, insect stains, etc.)
Do not leave a flicker
Raspberry color and smell.
Use 50-100ml for 10L of water.

Stock: > 1 pcs.

K01-SHAMPOON-0.5L

Price: 2.20 €

wax

Stock: > 1 pcs.

V01002

Price: 6.50 €

Wax

Stock: 0 pcs.

VAS400

Price: 3.00 €

Car shampoo

Stock: > 1 pcs.

42506

Price: 3.00 €

Car shampoo

Stock: > 1 pcs.

K01-SHAMPOON-1L

Price: 3.75 €

Īpaši noturīgs vasks

Extremely durable wax, 395 g, Turtle Wax
Reliable gloss, protection and versatility:
Wash the car and allow it to dry. Use on a clean surface, away from direct sunlight. Place a small amount of product on a damp applicator and apply evenly on the car panel. Allow it to dry, remove excess product with a soft cloth. Lightly polish to maximum shine.

NOTE: Not for use on vinyl, wood, or matte surfaces.

Stock: > 1 pcs.

T50187

Price: 7.00 €

Metallic vasks PTFE

PTFE METALLIC WAX with Teflon, 500ml, Turtle Wax
Metallic Autovasax + PTFE provides the best results and durability using the highest technology, combined with the outstanding workmanship of Turtle Wax. The added fluoropolymer (PTFE) gives the wax excellent water repellency and durability against environmental pollution.

Tips from Turtle:
If the surface to be waxed is scratched, scratches must first be removed using a regenerating polisher. The product will be difficult to use in direct sunlight and on a heated surface. Do not use the product if the varnish layer is damaged or on glass or plastic (rough) parts.

Instructions for use: 1. Make sure the body is clean and dry, shake the bottle well.
2. Pour the liquid on a clean cloth and apply it evenly on the surface to be planted in a circular motion. 3. Allow to dry, then wipe with a clean dry cloth. 4. Lightly polish the surface to a shiny shine.

Stock: > 1 pcs.

T52653

Price: 7.00 €

Bampera krāsa

Bumper Spray Dark Grey 400ml
Excellent coverage and adhesion to repair and embellish plastic bumpers, maintaining the original bumper structure
Lasting colour and lasting gloss.
Scratch free, shock proof and is resistant to chemicals and weather influences.

Stock: > 1 pcs.

M04075

Price: 8.54 €

Bremžu suportu krāsa

Brake Caliper Yellow 400ml
Paint to highlight brake pads.

Good filling properties and a lasting gloss.
Scratch free, shock proof and resistant to petrol, chemicals and weather influences, is rust and dirt preventive.
MoTip Brake Caliper Spray is available in four colours.

Stock: > 1 pcs.

M04097

Price: 9.96 €

Paint

Stock: > 1 pcs.

150A

Price: 6.00 €

Black, glossy color

ALL BLACK GLOSS´ (Ae 450ml), Concept

Durable, acrylic paint developed using the latest technology.
Excellent and durable coating: the ingredients in it contain a more durable coating and give a matte look. USAGE: easy to apply, quick-drying.
SURFACE PREPARATION: Lightly treat the surface with damp or dry fine sandpaper. Make sure the surface is clean and dry, free of dirt, oil, wax, etc. stains. The metal surface must be pre-treated with primer. APPLICATION: Shake the spray vigorously, continue to shake for another 2 minutes after you hear the balls move in the spray. Spray the spray from a distance of 25-30 cm, apply several thin coats of coating. Observe a 10-minute break between each subsequent coat. Allow the surface to dry for 24 hours until the coating has completely hardened. After use, turn the spray upside down and spray to clean the spray nozzle.

Stock: > 1 pcs.

C44412

Price: 4.50 €

Bumper color

BLACK BUFFER COLOR (AE 450ML), CONCEPT

It is a solution offered by manufacturers for restoring the color of colored plastic and vinyl surfaces. Removes stains on buffers: easily, simply and quickly removes white stains and deposits on buffers. Does not create clutter: the product has all the best properties of aerosol-shaped products - always ready to use, easy to apply, does not cause clutter and clutter, can only be used as needed and stored until the next use. Extremely flexible: also suitable for vinyl coating.
SURFACE PREPARATION: It is very important to carry out the preparation properly by carefully and thoroughly cleaning the plastic surface. Clean the surface of wax, silicones, deposits, etc. Lightly treat the surface with fine sandpaper. APPLICATION: Shake the spray vigorously, continue to shake for another 2 minutes after you hear the balls move in the spray. Spray the spray from a distance of 25-30 cm, apply several thin coats of coating. Observe a 10-minute break between each subsequent coat. Allow the surface to dry for 24 hours until the coating has completely hardened. After use, turn the aerosol can upside down and spray to clean the spray nozzle.

Stock: > 1 pcs.

C43712

Price: 7.00 €

Grunts krāsa

Gray primer GRAY PRIMER- is an advanced technology acrylic primer with advanced coating properties. EXTREMELY DENS: fast, high-quality performance. APPLICATION: Easy-to-use primer suitable for metal, wood and some plastic surfaces. Gray Primer is compatible with both acrylic and cellulose topcoats. INSTRUCTIONS FOR USE: Make sure the surface is completely clean and free of oil, wax, etc. Shake the spray vigorously for another 2 minutes after you can hear the balls moving in the spray. Holding it straight, spray from a distance of 25-30 cm. AFTER USE: Invert the spray and spray to clean the spray nozzle.

Stock: > 1 pcs.

C44612

Price: 5.50 €

Buferu krāsa

GREY BUFFER COLOR (AE 450ML), CONCEPT

It is a solution offered by manufacturers for restoring the color of colored plastic and vinyl surfaces. Removes stains on buffers: easily, simply and quickly removes white stains and deposits on buffers. Does not create clutter: the product has all the best properties of aerosol-shaped products - always ready to use, easy to apply, does not cause clutter and clutter, can only be used as needed and stored until the next use. Extremely flexible: also suitable for vinyl coating.
SURFACE PREPARATION: It is very important to carry out the preparation properly by carefully and thoroughly cleaning the plastic surface. Clean the surface of wax, silicones, deposits, etc. Lightly treat the surface with fine sandpaper. APPLICATION: Shake the spray vigorously, continue to shake for another 2 minutes after you hear the balls move in the spray. Spray the spray from a distance of 25-30 cm, apply several thin coats of coating. Observe a 10-minute break between each subsequent coat. Allow the surface to dry for 24 hours until the coating has completely hardened. After use, turn the aerosol can upside down and spray to clean the spray nozzle.

Stock: > 1 pcs.

C43812

Price: 8.00 €

Disku krāsa

RAPID WH.SILVER (Ae 450ml), Concept

Quick-drying silver paint for discs is a quick coating, ideal for car discs, engine parts, etc. Quick-drying: the car can be used soon after the product is applied. Versatile: the improved thick paint composition makes Rapid Wheel Silver ideal for coating both metal discs and plastic decorative discs.
SURFACE PREPARATION: make sure the surface is clean, dry and free of rust, oil, grease, deposits, etc. Lightly treat the surface with fine sandpaper. APPLICATION: Shake the spray vigorously, continue to shake for another 2 minutes after you hear the balls move in the spray. Spray the spray from a distance of 25-30 cm, apply several thin coats of coating. Observe a 10-minute break between each subsequent coat. Allow the surface to dry for 24 hours until the coating has completely hardened. After use, turn the spray upside down and spray to clean the spray nozzle.

Stock: > 1 pcs.

C43912

Price: 4.50 €

Cinka pārklājums

Zinc coating (Ae 450ml)
The product is intended for professional use only.
MULTIFUNCTIONAL: Zinc Galv is suitable both as a primer and as a coating for various manufacturing, maintenance and construction industries.
FOR WELDING: The substances in the composition ensure efficient treatment of joints and joints before welding.
ANTI-RUST AGENT: Used as a coating that reduces steel and iron parts such as pipes, slabs, etc. rusting.
VERSATILE: Can be applied to acrylic or cellulose paints (do not spray on alkyd paint, as it may shrink). It can be repainted with acrylic, cellulose, epoxy and alkyd paints.
NOTE: Zinc life cycle on surfaces 9 months.
APPLICATION: Make sure that the surface to be treated is clean, dry and free from dust, oil, wax and the like. Shake the spray vigorously for another 2 minutes after you can hear the balls moving in the spray. Spray the spray from a distance of 25-30 cm, apply several thin coats of coating. Allow the surface to dry for 2 hours until the coating is completely hardened before applying the paint.
AFTER USE: Invert the spray and spray to clean the spray nozzle.

Stock: > 1 pcs.

C46012

Price: 8.00 €

Melna matēta krāsa

MATTE BLACK COLOR (Ae 450ml), Concept
Durable, acrylic paint developed using the latest technology.
Excellent and durable coating: the ingredients in it contain a more durable coating and give a matte look. USAGE: easy to apply, quick-drying.
SURFACE PREPARATION: Lightly treat the surface with damp or dry fine sandpaper. Make sure the surface is clean and dry, free of dirt, oil, wax, etc. stains. The metal surface must be pre-treated with primer. APPLICATION: Shake the spray vigorously, continue to shake for another 2 minutes after you hear the balls move in the spray. Spray the spray from a distance of 25-30 cm, apply several thin coats of coating. Observe a 10-minute break between each subsequent coat. Allow the surface to dry for 24 hours until the coating has completely hardened. After use, turn the spray upside down and spray to clean the spray nozzle.

Stock: > 1 pcs.

C44312

Price: 4.50 €