Instruments

Abpusējā līmlenta

Double-sided adhesive tape 90x2cm

Stock: 0 pcs.

Akumulātora lādēšanas ierīce

Battery charger EST-302 is designed for automatic charging of lead-acid batteries with a voltage of 6 V or 12 V and a capacity of 34 ÷ 60 Ah.
- 230 V AC power supply
- Rated power consumption 70 W
- Output voltage 6 V 12 V
- peak charging current 6A
- Rated charging current 4.5 A
- Capacity of rechargeable batteries 34 ÷ 60Ah
- Protection against transformer overheating using a thermal switch
- Protection against short circuit with fuse
- Plastic case
- Dimensions in mm: 180 x 150 x 100
- Weight in kg: 1.50

Stock: > 1 pcs.

Akumulātora lādēšanas ierīce

Charger with microprocessor 4A IP65 TUV / GS.
Ideal for lead-acid, gel and AGM batteries.
Use - cars, ATVs, boats, mowers, scooters, motorcycles, snowmobiles and jet skis.
Microprocessor control, nine-step intelligent charging characteristics.
Stable charging function.
Diagnose and charge heavily discharged batteries.
Insulated terminals.
Battery capacity 1.2 Ah - 120 Ah
Input parameters: 220-240 VAC 50 Hz
Output parameters: 6V 2A / 12 V 2 / 4A
Battery Capacity: 1.2 Ah - 120 Ah

Stock: > 1 pcs.

Akumulātora lādēšanas ierīce

The DBC-4A rectifier can be used to charge lead-acid (conventional and MF), Ca / Ca, AGM and gel batteries. This is a microprocessor rectifier made in accordance with the IP65 standard, which means resistance to dust and splashes, as well as splashing with a low-pressure water jet. Has guarantees from:
-short circuit.
- reverse battery connection (reverse polarity).
-open circuit.
-protection.
- recharge the battery.
- overload rectifier.
Rectifier overheating.
Has 6 charging modes:
Batteries 6 V to 14 Ah
7.2 V to 2 A
7.4 V to 2 A (charging at low temperatures)
12 V to 14 Ah batteries and deeply discharged

14.3 V to 2 A
14.7 V to 2 A (charging at low temperatures)
12V battery above 14Ah

14.3 V to 4 A
14.7 V to 4 A (charging at low temperatures)
It shows the battery voltage and charge level on an ongoing basis and adjusts the charging current depending on its needs. After charging, FULL is displayed and the battery voltage is maintained.
Specifications:
Supply voltage 230V 50 Hz
Output voltage: 6 / 12V
Power Consumption: About 60 W (Standby 1 W)
Charging voltage:
7.4 V (for 6 V batteries)
14.7 V (for 12 V batteries)
Charging Current:
2A +/- 10%,
4A +/- 10%
Supported Battery Capacity:
6V - 1.2Ah to 14Ah
12V - 1.2Ah to 14Ah and 14Ah to 120Ah
Degree of protection: IP65
6 charging programs switched by the “OPERATION MODE” button
Has a backlight display.
   Gel batteries with a capacity of up to 14 Ah, used in motorcycles and scooters, must be charged by selecting the program with the motorcycle icon on the display.
  Charging with a higher current may damage the battery.

Stock: > 1 pcs.

Akumulātora lādēšanas ierīce

Battery Charger 42403.

Specifications:
- capacity 20-90Ah,
- charging voltage of 6-12V,
- charging the battery in 3-4 hours,
- LED indicator for monitoring the level of load,
- if the battery is overloaded, the charger will maintain it at a normal current level.
- if a short circuit occurs, the charger will automatically turn off and resume its work after 1-2 minutes.
- High-quality plastic case.

  Only for 6 V and 12 V batteries with lead and acid.
The charger should be powered by an AC voltage source of 220-240V.
  Avoid contact between the positive and negative terminals to prevent a short circuit.
  We recommend storing the rectifier in a dry and well-ventilated area.
- Quality goods.
- Easy to use.

Stock: > 1 pcs.

Akumulātora lādēšanas ierīce

Battery Charger for all types of batteries (lead-acid SLA, AGM, GEL).
- Charging voltage 12V/24V.
- Fully automatic charging process.
- Charging current: 12A - recommended for battery, capacity from 8Ah to 180Ah.
- Displays battery percentage and current battery voltage.
- Automatically carries out the regeneration process when a deeply discharged battery is detected.
- Displays the current charging capacity of the generator as a percentage.
- Start assist function 75A - petrol up to 3000 cm3, diesel up to 2000 cm3.
- Durable clips and metal housing.
- Reverse connection and short circuit protection.
- Overload protection 80A.
- LED display provides convenient operation with an overview of the charging status.
- cables 6mm2: 150cm.
- power cable: 190cm.

Stock: > 1 pcs.

Akumulatora lādēšanas ierīce

Compact and powerful lithium starter OSRAM BATTERYstart 300 with external battery function for small and medium-sized vehicles with a voltage of 12 V (petrol engines 6 l and diesel engines 3 l).
The starter is equipped with a bright LED flashlight.
This jump starter features a power bank feature with two 2.1A USB ports to charge your electronic devices on the go - just plug in the USB charger and the battery starts working.
Technical description:
- Voltage: 12 V.
- Starting current: 300A (max. 1500A)
- Battery: LiCo2 13000 mAh.
- Charging: micro USB 3 hours.
- Operating temperature: -20°С…+40°С
- Dimensions: 168.00 x 88.00 x 33.00 mm.
- Weight: 490 g.

Stock: 0 pcs.

Akumulatora lādēšanas ierīce ar Powerbank

02524- Charger with Powerbank 12V 4Ah 800A SJ02, portable.
The modern charger is a small and highly functional battery-powered car starter with powerbank function, a safe equipment for every auto repair shop, home garage and car.
It offers a wide range of features:
- Starting all petrol and diesel engines.
- Battery charge level indicator.
- LED display.
- Built-in flashlight.
- Electronic device charging function - allows you to charge the batteries of a smartphone, laptop, camera, tablet or other electronic device.
- External battery.
- Battery capacity up to 4000 mAh.
- Durable housing.

Stock: > 1 pcs.

Voltmeter

Textile floor mats - made from special auto textile material. Good protection from dust and

Stock: > 1 pcs.

accumulator tester

Stock: > 1 pcs.

akumulātora testeris

- accumulator tester
12V/24V

Stock: > 1 pcs.

Āmurs

Safety hammer with hanger.
Hammer and safety knife in one.
A very useful and indispensable device in case of a collision or accident.
In modern cars, belt tensioners are triggered on impact, sometimes it is impossible to unfasten them. Thanks to this device, we can easily break the glass when the door is jammed or cut the seat belt, even if we have a limited range of motion.
Dimensions:
- total height approx. 17.5 cm
- width max. at the top about 7cm

Stock: > 1 pcs.

Asmeņi nažiem

Blades for knives.
- With breakable segments.
- Blade length 18 mm.
- 10 pieces in a set.
Breakable knife blades provide a consistent and high-quality cutting edge and high rigidity of the entire blade despite its segmented design.
Due to this, when the blade is blunt, one segment can be broken off, obtaining another, sharp fragment.

Stock: > 1 pcs.

Ātri noņemams uzgalis

11440
Adapter tip, M1 / 4 quick-detachable.
It is used to connect the pneumatic tool to the compressed air source.
Material - carbon steel.
Packing - blister.

Stock: 0 pcs.

Atslēdznieka āmurs

HAMMER WITH A WOODEN HANDLE
Hammer head is made of 45 steel by the hot stamping method (forging hammers).
Hardness of the impact part - 45-45 HRC.
Square-shaped hammer head with flat and pointed impact parts.
Handle of the hammer is made of wood and covered with protective varnish.
Hammer head is protected from corrosion by chemical oxidation.

Stock: 0 pcs.

Atslēdznieka āmurs

HAMMER WITH A WOODEN HANDLE
Hammer head is made of 45 steel by the hot stamping method (forging hammers).
Hardness of the impact part - 45-45 HRC.
Square-shaped hammer head with flat and pointed impact parts.
Handle of the hammer is made of wood and covered with protective varnish.
Hammer head is protected from corrosion by chemical oxidation.

Stock: > 1 pcs.

Atslēdznieka āmurs

HAMMER WITH A WOODEN HANDLE
Hammer head is made of 45 steel by the hot stamping method (forging hammers).
Hardness of the impact part - 45-45 HRC.
Square-shaped hammer head with flat and pointed impact parts.
Handle of the hammer is made of wood and covered with protective varnish.
Hammer head is protected from corrosion by chemical oxidation.

Stock: > 1 pcs.

Atslēdznieka āmurs

HAMMER WITH A WOODEN HANDLE
Hammer head is made of 45 steel by the hot stamping method (forging hammers).
Hardness of the impact part - 45-45 HRC.
Square-shaped hammer head with flat and pointed impact parts.
Handle of the hammer is made of wood and covered with protective varnish.
Hammer head is protected from corrosion by chemical oxidation.

Stock: > 1 pcs.

Auto apkopes ratiņi

Mechanic creeper
Intended for professional usage in service stations and for self-repair.
Mechanic creeper is made of resistant to aggressive technical fluids and impact resistant plastic.
Equipped with three pairs of swivel rubber wheels.
Equipped with foam rubber cushion pad with leatherette cover.
For ease of movement is equipped with a handle.
Has two pans for the tools and spare parts placement.

Stock: > 1 pcs.

Auto kompresors

Code 01134
Car compressor.
Product description:
It is designed for cars, motorcycles, bicycles, sports equipment, mattresses, inflatable toys, etc.
Power supply - 220-240 V. AC or 12 V. DC.
The maximum pressure is 200 PSI.
Cable length - 3m with a cigarette lighter plug.
Adapters - 3 pieces.
Weight 1.753 kg

Stock: > 1 pcs.