Towbars

Tow bar

Tow bar

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Piekabes āķa gals

Special hook used for towbars of the American type.
-This device uses a special mechanism that prevents the appearance of a knock when driving with a trailer.
- also allows you to adjust the lifting height of the hook - can be set lower, can be set higher.

Stock: > 1 pcs.

Tow bar

Stock: 0 pcs.

Piekabes āķa gals

-AH-10-spec- American-made light car hook.
- ball 50 mm.
-the size of the hole where it is inserted must be 32x 32 mm.

Stock: > 1 pcs.

Sakabes āķa gals

Plate with ball 50 mm
- 4 bolts M 12, distance 83x56 mm
- weight of vertical load S = 250 kg, D = 23.5 kN
- weights: hook 4 kg

Stock: > 1 pcs.

Piekabes āķa gals ieskrūvējams

Hook tow bar with thread
-18 mm

Stock: > 1 pcs.

Bung

Stock: 0 pcs.

Plāksne

Plate under contact socket

Stock: > 1 pcs.

Plāksne

Plate under contact socket

Stock: > 1 pcs.

Plāksne

Plate under contact socket

Stock: > 1 pcs.

Plāksne

Plate under contact socket

Stock: > 1 pcs.

Plāksne

Plate under contact socket

Stock: > 1 pcs.

Piekabes āķa gals

Special hook used for cars with American towbars.
It enables turning over, which facilitates the use on low and high towbars.

Stock: > 1 pcs.

Hook

Stock: 0 pcs.

Slēdzenes vāciņš

Cover lock for tow bar removed vertically.
keys included

Stock: > 1 pcs.

Piekabes āķa skrūvju komplekts

Kit bolts for mounting the towbar hook.
-M12 x 75 mm.

Stock: > 1 pcs.

Piekabes āķa detaļa

740.043 towing hook with ball max: 3500kgs
Traction capacity approved 3.500 kg
Ball joint Ø 50mm.
2-hole fixation:
Center to center 90mm
Ø 25mm axle
D value: 17 kN
S value: 250 kg

Stock: > 1 pcs.

Combination ball head

Trailer weight: 3500 kg
Ball diameter Ø 50 mm.
The flange is fastened with four screws (pitch 90x40 mm), with clamp
  equipped with a clamp. You can tow traditional trailers or trailers equipped with a drawbar with a loop.
The clamp provides additional protection against the uncoupling of the trailer.
The mechanism is intended for vans equipped with support beams with four holes (plate with two rows and a pitch of 90 x 40 mm).
It is certified for use in all countries of the European Union.

Stock: 0 pcs.

Sakabes āķa gals

- weight - 4.1 kg.
- trailer weight - 3500 kg.
- vertical load - 150 kg.
-manufacturer- WESTFALIA.

Stock: > 1 pcs.