Components

DT kabelis Hane

Code 1605-N8K202
DT plug with cable.
Description
• Consists of 2 cables - with a DT plug and with a corresponding DT plug
• Total length 0.5 m
• wire 2x0.75 mm²
• ADR approved

Stock: > 1 pcs.

Plāksnes turētāja montāžas komplekts

Code 1605-3032
Mounting kit for stand, 20 pcs.
The kit includes:
- 20 stainless steel screws for fixing the plate,
-2 screws for fixing a plated number plate,
- 2 white caps for screw heads.

Stock: > 1 pcs.

Rezistors LED lampai

E1368
Resistor for LED lamp 12V.
Resistor designed for installation in 12V trailers with LED lamps.
Ensures correct operation of LED (light-emitting diode) lamps using a standard breaker - designed for conventional incandescent lamps.
The resistor must be installed in a trailer with a standard switch between the pointer switch and LED lamps, separately for the left and right side.
The price is for 1 piece.

Stock: 0 pcs.

Lazer lukturu aizsargs

Made from high-tech impact-resistant and washable neoprene, the new Lazer Lamps universal LED covers are available in 5 different lamp sizes. Protected by high-strength Velcro pads, the covers are easy to install and remove.
Optimally designed covers optimized for the Triple-R series, but potentially suitable for any kind of LED light barriers, also have the advantage of significantly reducing the wind noise that may come from some of the larger lamps when installed above the windshield.

Stock: 0 pcs.

Electrical wires

Stock: > 1 pcs.

Lazer gaismas kliedētājs

The amber lenses for the Triple-R range of lights alters the standard 5000 kelvin colour temperature to ‘selective yellow’. Available either as a flat (0 degree) or reeded (15 degree) lens cover, the amber lenses are regarded as improving visibility in rain, fog, and snow conditions. The lenses are made from acrylic, and feature a gasket which helps prohibit water and dust getting between the lenses. The reeded lens is secured in place using 4 spring clips supplied with each lens.
Come supplied with 4x spring clips.
-designed only for lamps of the second generation.

Stock: 0 pcs.

El.vadi

1605-WK022
A set of wiring for two lamps for connection from the battery.
Application: to control car lighting.
For convenience, it has a remote control and a flash activation function.
Maxim. power 300 watts.
Voltage 12-24 V.
Operating temperature -30 ° C ... + 50 ° C

Stock: 0 pcs.

El.vadi

1605-WK018
Set of wires HD Deutsch for one lamp, for connection from the battery.
Kit: relay + wiring harness.
Maximum power 300 watts.
12V relay.
Working temperature from -40C to + 150C.

Stock: 0 pcs.

El.vadi

1605-WK023
HD Deutsch wiring kit for two lamps for connection from a battery.
Application: auxiliary lights, daytime running lights, beacon.
Max. Power 300W.
Voltage 12V.
Operating temperature -30 ° C ... + 50 ° C.

Stock: > 1 pcs.

Switch

Stock: 0 pcs.

LAZER LED converter

Stock: > 1 pcs.

El.vadi

1605-WK021
HD DTP wiring kit for connecting one lamp.
Set: relay + wiring.
Maximum power 300 W.
12V relay.

Stock: > 1 pcs.

El.vadi

Electrical wires 1L - LP-220.
Rated voltage: 12V
Number of headlights: 1
For model: LAZER ST-Range, Triple-R Elite (Gen2), Linear.
The kit includes:
- 12V relay (in a waterproof case),
- fuse 20A,
- a terminal for connecting the battery at one end,
- 2.2 m cable for connecting the headlight,
- an additional switch for turning on / off the independent operation of the high beam.
Allows the use of LED Lazer lamps either in parallel with standard vehicle lighting or via an independent switch that can be installed inside your vehicle.
Compatible with:
ST Evolution (All Products)
Triple-R 750 Elite (Gen2)
Triple-R 850 Elite (Gen2)
Triple-R 1000 Elite (Gen 2)
Linear-6 (Std / Elite)
Linear-12 (Std / Elite)
Linear-18 (Std / Elite)
Linear-36
Linear-42
Linear-48

Stock: 0 pcs.

El.vadi

Wiring kit, code LAZER 1L-LP-PL-120, for one LAZER lamp with built-in parking light function.
Cable length 1.2 m
Included :
- relay 12 V
- 20 A fuse.
- on/off switch for independent high beam operation.
The relay holder complies with the IP53 standard.

Stock: 0 pcs.

El.vadi

TWO-LAMP WIRING KIT (UTILITY SERIES, 12V) for Utility Series work lamps

5m cable lengths
Includes 12V relay and 10 amp fuse
Relay holder approved to IP53 when mounted in a vertical (upright) orientation
2-pin deutsch connections
Includes on/off switch for independent operation
Braided cable sections for added protection in engine bay

Stock: 0 pcs.

Slēdzis

Switch KE/SM/LI/220
-12-24V, 3A
- rated AC voltage: 250 V
- switch type: ON-OFF
- contact configuration: SPST
- number of contacts: 3
- indicator: red
-rectangular, 18.8x12.9x14.4mm

Stock: 0 pcs.

Slēdzis

Switch with red illumination.
- 12V/ 230V
- oval.
- number of contacts: 3.
- for installation, a hole with a diameter of 25 mm is required.

Stock: > 1 pcs.

Vadības bloks

Control block, code 1605-WK008.
For installing additional headlights on cars with CANbus.
The control unit detects and turns on the current 12/24 V 1 A when the headlights of the car are on.

Stock: > 1 pcs.

El.vadi

1605-WK019
Wiring kit for two lamps with switch.
Application: additional headlights, daytime running lights, high beams.
Maksim. power 500 watts.
Voltage 12V.
Operating temperature -40°С...+150°С.
Included:
- headlight installation wire 2.5 m with DT two-prong plug, complete set of wires for connecting from the battery to the headlights,
- relay 50A,
- fuse 50A.

Stock: 0 pcs.

El.vadi

1605-WK062.
Wiring kit for connecting one lamp.
Kit: relay, fuse and 3-pole diesel fuel.
- Fuse: 25A.
- Relay: 40A.
- Wire 2.5 mm²): 2.5 m.

Stock: 0 pcs.