Skid plates

Engine, gearbox protection MET CITROEN C 3 AIRCROSS,OPEL CROSSLAND X

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Dzinēja, ātrumkārbas aizsargs MET CITROEN BERLINGO/C 4 PICASSO,OPEL COMBO/GRANDLAND X

Code 2.0912.00
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: > 1 pcs.

Engine, gearbox and radiator protection MET CHEVROLET CRUZE

Stock: 0 pcs.

Engine, gearbox protection MET CHEVROLET BOLT EV

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Dzinēja, ātrumkārba, sadales kārba, radiators aizsargs MET VW AMAROK

Engine, gearbox, transfer case.
Only V-3,0 TDI.
Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: > 1 pcs.

Dzinēja, ātrumkārba, sadales kārba, radiātors aizsargs MET FORD RANGER/VW AMAROK

Engine, gearbox, transfer case.
Only V-2,0 TDI.
Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: > 1 pcs.

Dzinēja, ātrumkārba, sadales kārba aizsargs MET VW AMAROK

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: > 1 pcs.

Engine, gearbox and transfer case protection MET TOYOTA HI-LUX

Stock: 0 pcs.

Dzinēja, ātrumkārba, radiatora, sadales kārba MET TOYOTA HI-LUX

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: > 1 pcs.

Engine and starter protection MET AUDI Q 7,VW TOUAREG

Stock: 0 pcs.

Dzinēja un radiatora aizsargs MET BMW 1(F20/F21)

Engine and radiator protection, code 2.0917.00.
Suitable for BMW 1 F20 / F21 (118i), 2015-2017.
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Dzinēja un radiatora aizsargs MET TOYOTA LAND CRUISER 120

Code 2.0046.00
The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand).
The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts.
The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible.
All necessary hardware is included.

Stock: 0 pcs.

Engine protection MET SUZUKI GR VITARA

Stock: 0 pcs.

Engine and radiator protection MET SUBARU FORESTER

Stock: 0 pcs.

Engine and radiator protection MET SUBARU FORESTER

Stock: 0 pcs.

Engine and radiator protection MET MITSUBISHI L 200/PAJERO SPORT

Stock: 0 pcs.

Engine and radiator protection MET MERCEDES BENZ E-klasse (W212)

Stock: 0 pcs.

Engine and radiator protection MET MERCEDES BENZ E-klasse (W211)

Stock: 0 pcs.

Engine and gearbox protection MET CHEVROLET CAMARO

Stock: 0 pcs.

Engine and radiator protection MET BMW 5 (F10)

Stock: 0 pcs.