Instruments

Voltmeter

Designed to protect from mechanical damages and scratches. Creates an upcoming air streams f

Stock: > 1 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Eļļotājs

OIL CAN 300ML METAL (FLEXIBLE END)
Used for oiling friction units with liquid lubricants which do not require supply under pressure.
Equipped with spout.

Stock: > 1 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Testeris

Voltmeter 6-24V

Stock: 0 pcs.

Testeris

Voltage detection tester, 6-24V.
The device is designed to determine the voltage in the electrical installations of vehicles with a voltage of 6/24V.
Inside the transparent handle is a light that lights up when voltage is detected.
The included alligator clip cable simplifies vehicle wiring troubleshooting and is used to quickly detect power failures in electrical systems, fuses, or lighting.
Technical data:
- Operating range: 6V-24V.
- retractable cord with crocodile clip.
- Material: plastic.
- Length: 120 mm.
Weight: 55g

Stock: > 1 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: > 1 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: > 1 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Plastmasas savilcēji

Plastic ties, black color
-80mm x 2.4mm

RX Serie
Technical data:
Operation temperaturę: -35°C do +85°C
Flame resistance: UL94 class V2
Materiał: polyamide 6/6
Resistance to: UV, oils, grease, salt, thin acids

Stock: > 1 pcs.

Metāla birste

Product description
The brush is made of high-quality, corrugated brass wire. Intended for cleaning metal surfaces from rust, paints, varnishes, as well as for cleaning welds and threads. The handle is made of durable plastic with high tear resistance.

Kit composition:
Brass-plated, crimped wire brush
total length: 25.5 cm
length of abrasive element: 13 cm
brass wire
plastic handle

Stock: > 1 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Sastiprināšanas bļoda metāla magnēta

Stock: 0 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: > 1 pcs.

Steel wire brush

Stock: 0 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: > 1 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.