Instruments

riepu spiediena mērītājs

Tyre pressure gauge metal 7,5bar

Stock: > 1 pcs.

Caurule ar sifonu, degvielas pārsūknēšanai

Tube with siphon for pumping fuel
20/2 mm, sifons Fi20

Stock: > 1 pcs.

Caurule ar sifonu, degvielas pārsūknēšanai

Tube with siphon for pumping fuel
14/2mm, sifons Fi14

Stock: > 1 pcs.

Caurule ar sifonu, degvielas pārsūknēšanai

Tube with siphon for pumping fuel
2,5m, sifons Fi24

Stock: > 1 pcs.

Skrūvspīles

Vice, rotary
-150 mm
Made by precision steel casting.
They have an anvil on the body.
The base is rotary.
Varnish-and-paint coating.

Stock: 0 pcs.

Riteņa atslēga

Wheel nut wrench
TWW-17/19mm 21/23mm

Stock: > 1 pcs.

Instrumentu komplekts

Set is optimized for use at the service stations, in the car or in the garage
Lifetime warranty (up to a complete physical deterioration)
Set is equipped with sockets and wrenches with a square drive 1/4' and 1/2'
Sockets with Super Lock profile of the working part for more secure grip of the fasteners especially deformed.

The set includes сombination wrenches of high accuracy. Made by cold stamping method
Hardened to 39 HRC, wear-resistant, intended for the long-term usage at max loads
Packaging - reinforced plastic case with metal locks and hinges with metal axes

Tool with the square drive 1/4' (6,4 mm)
Hex socket 1/4' 5, 5,5, 6, 7, 8, 9, 10, 11, 12, 13 mm
Torx® socket 1/4' E4, Е5, Е6, Е7, Е8, E10
Deep socket 1/4' 6, 8, 10, 12, 13 mm
Ratchet wrench 150 mm
T-shaped tap wrench 100 mm
Extension straight 50, 100 mm
Extension flexible 150 mm
Universal joint 39 mm
Handle-extension 1/4' 150 mm
Magnetic bit holder 50 mm
Bit adapter 25 mm
Tool with the square drive 1/2' (12,5 mm)
Super Lock socket 1/2' 10, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32 mm
Spark plug socket 1/2' 16, 21 mm
Ratchet wrench 250 mm
Flexible handle 375 mm
Extension straight 125, 250 mm
Extension wave 75 mm
Universal joint 75 mm
Socket adapter with hole 3/8'-1/2'
Hand tool
Combination wrench 6x6, 7x7, 8x8, 10x10, 12x12, 13x13, 14x14, 15x15, 16x16, 17x17, 19x19 mm
Flare nut wrench 7х11, 8х10 mm
side cutters 160 mm
Combination pliers 180 mm
Hammer with a wooden handle 0,300 kg
Professional Phillips screwdriver PH2x38 mm
Professional Phillips screwdriver PH2x100 mm
Professional slotted screwdriver SL6,5x38 mm
Professional slotted screwdriver SL6,5x100 mm
Car circuit tester plastic 6 - 24 v
L-type hex key 3,0, 4,0, 5,0, 6,0, 7,0 mm
Inserts-bits 1/4'
Bit insert Torx® 1/4' Т10, Т15, Т20, Т25, Т27, Т30
Bit insert hex 1/4 ' 1,5, 2, 2,5, 3, 4, 5, 6 mm
Bit insert Phillips Phillips 1/4' РН0, РН1, РН2, РН3, РН4
Bit insert cross Pozidrive 1/4' PZ0, PZ1, PZ2, PZ3, PZ4
Bit insert slotted 1/4' 3, 4, 4.5, 5, 5.5, 6, 7 mm

Stock: 0 pcs.

Skrūvgriezis Torx

Intended for professional usage and has improved strength characteristics and extended service life.
Screwdriver has a Phillips cross magnetized working profile.
Screwdriver rod is made by the drawing method from S2 tool steel, hardened to 52-56 HRC and protected against corrosion by the chromium plating.
Screwdriver hex rod is equipped with an impact part on the handle which allows to use a screwdriver for works with require greater effort.
Two-component impact-resistant handle has rubberized anti-slippage coating.
-mm 3x200

Stock: > 1 pcs.

Side cutters

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 55-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by phosphatizing with additional grinding

Stock: 0 pcs.

Side cutters

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 55-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by phosphatizing with additional grinding

Stock: > 1 pcs.

Kombinētās knaibles

>Made of chrome-vanadium steel by the hot stamping method (forging hammers)
>Entirely meet requirements of GOST 5547-93
>Have four working surfaces for fixing flat, round objects, for cutting edges along the plane and side cutting pliers for cutting wires
>Equipped with comfortable ergonomic two-component plastic handles with protective knurling which protects the palm from slippage
>Cutting edges are induction hardened to 55-58 HRC
>Protected from corrosion by phosphatizing with additional grinding

Stock: > 1 pcs.

Pagarinātas knaibles

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 53-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by nickel-chromium coating with matt surface effect

Stock: 0 pcs.

Regulējāmās plakanknaibles

>Made of chrome-vanadium steel by the hot stamping method (forging hammers).
>Equipped with comfortable rubber handles which protect the palm from slippage.
>Jaws induction hardened to 55-58 HRC.
>Protected against corrosion by phosphating.

Stock: 0 pcs.

Tap wrench L-shaped telescopic (1/2")

>Tap wrench is made by cold stamping method
>Material – chrome-vanadium tool steel
>Equipped with a spring-loaded holding ball
>It is chrome plated and matt finish to resist corrosion
>Has a standard square drive 1/2'
>Wear-resistant, suitable for the long-term usage at max loads
>Equipped with a plastic handle with a rubber anti-slip coating

Stock: 0 pcs.

Pagarinātas knaibles

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 53-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by nickel-chromium coating with matt surface effect

Stock: 0 pcs.

Sprūdatslēga ar kvadrātu

>Mechanism with 72 teeth allows to rotate by 5 degree minimum angle
>Equipped with a flag switch, a quick-reset button and a holding ball
>Made by cold stamping method
>Material - chrome-vanadium steel CrV50BV30
>It is hardened to hardness not less than 39HRC
>It is chrome plated and matt finish to resist corrosion

Stock: 0 pcs.

Side cutters

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 55-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by phosphatizing with additional grinding

Stock: 0 pcs.

Long nose pliers

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 53-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by nickel-chromium coating with matt surface effect

Stock: 0 pcs.

Rievots skrūvgriezis

>Intended for professional usage and has improved strength characteristics and extended service life.
>Screwdriver has a standard slotted magnetized working profile.
>Screwdriver rod is made by the drawing method from S2 tool steel, hardened to 52-56 >HRC and protected against corrosion by the chromium plating.
>Screwdriver hex rod is equipped with an impact part on the handle which allows to use a screwdriver for works with require greater effort.
>Two-component impact-resistant handle has rubberized anti-slippage coating.

Stock: > 1 pcs.

Screwdriver

Stock: 0 pcs.