Instruments

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Kombinētā atslēga komplekts

Combination key set.
Set includes 6 combination wrenches placed on a durable plastic holder.
Wrenches are made of CRV6150 chrome-containing steel by hot stamping (forging hammers).
Wrench heads are hardened to 39-41 HRC.
profile of OVER DRIVE, which is perfectly adapted for work with undamaged fasteners.
Wrenches are protected against corrosion by matt chromium plating.
Set includes wrenches 8,10,12,13,14,17 mm.

Stock: 0 pcs.

Kombinētā atslēga komplekts

Wrenches are made of CRV6150 chrome-containing steel by hot stamping (forging hammers).
Wrench heads are hardened to 39-41 HRC.
Wrenches have a standard open end part.
Wrenches are protected against corrosion by matt chromium plating.
Set includes wrenches 6,8,10,12,13,14,17,19 mm.

Stock: > 1 pcs.

Kombinētā atslēga komplekts

Set includes 12 combination wrenches placed on a durable plastic holder.
Wrenches are made of CRV6150 chrome-containing steel by hot stamping (forging hammers).
Wrench heads are hardened to 39-41 HRC.
Wrenches are protected against corrosion by chromium plating with matt surface effect.
Set includes wrenches 6, 7, 8, 10, 11, 12, 13, 14, 15, 17, 19, 22 mm.

Stock: 0 pcs.

Kombinētā atslēga komplekts

Set includes 12 combination wrenches packed in a durable tetron bag.
Wrenches are made of CRV6150 chrome-containing steel by hot stamping (forging hammers).
Wrench heads are hardened to 39-41 HRC.
Wrenches are protected against corrosion by matt chromium plating.

Stock: 0 pcs.

Instrumentu komplekts

6-point sockets.
Manufactured by cold stamping.
Hardness at least 39 HRC.
Chrome protective and decorative coating with matt surface effect .
Has 1/4'(6.3 mm) square drive.
Heads.
-4, 4.5, 5, 5.5, 6, 7, 8, 9,10,11,12,13,14 mm.
Set is packed in a plastic case.

Stock: 0 pcs.

Instrumentu komplekts

A set of heads.
Sockets are made by cold stamping.
6-point sockets are made by cold stamping.
Hardness at least 39 HRC.
Covering — chrome with matting effect.
Packaging - plastic case.

Stock: 0 pcs.

Instrumentu komplekts

Universal set is optimized for use both in the car and in the garage.
All tools are made from chrome vanadium tool steel, tempered to hardness 39 HRC and are crome plated to resist corrosion.
Set meets requirements of Russian GOST and European DIN.
6-point sockets are made by of cold stamping .
Set includes wrenches and sockets with 1/4 'and 1/2' square drive.

Stock: 0 pcs.

Salona paneļu nocēlāju komplekts

Применяется при проведении арматурных работ при покраске автомобиля и при ремонте элементов декора салона автомобилей.
Применим для снятия панели приборов, центральной консоли, демонтажа аудиосистем, элементов обшивки салона и декоративных молдингов.
Набор состоит из 11 съёмников-лопаток различной конструкции.
Blades are made of high quality plastic.
Лопатки размещены в качественной тетроновой сумке, поставляются в картонной коробке.

Stock: 0 pcs.

Atslēdznieka āmurs

HAMMER WITH A WOODEN HANDLE
Hammer head is made of 45 steel by the hot stamping method (forging hammers).
Hardness of the impact part - 45-45 HRC.
Square-shaped hammer head with flat and pointed impact parts.
Handle of the hammer is made of wood and covered with protective varnish.
Hammer head is protected from corrosion by chemical oxidation.

Stock: 0 pcs.

Steel wire brush

Stock: 0 pcs.

Uzsitējveseris

The head of sledgehammer is made from tool steel using hot forging (drop-hammers forging).
It is heat treated and phosphate plated to resist corrosion.
Sledgehammer handle is made from fibreglass.
It has high mechanical strength, water and heat resistance.
Equipped with rubber pads for softening the impact and easy gripping.

Stock: 0 pcs.

Uzsitējveseris

The head of sledgehammer is made from tool steel using hot forging (drop-hammers forging).
It is heat treated and phosphate plated to resist corrosion.
Sledgehammer handle is made from fibreglass.
It has high mechanical strength, water and heat resistance.
Equipped with rubber pads for softening the impact and easy gripping.

Stock: 0 pcs.

Uzgaļu komplekts

KEY WRENCH SET 40 PCS
Manufactured by cold stamping.
Sets are complete with adapter socket from ½ to hex 10mm.
Hex: L=30 - Н4,Н5,Н6,Н7,Н8,Н10,Н12 , L=75 mm Н4, Н5, Н6, Н7, Н8, Н10, Н12.
Тогх®: L=30 mm:Т20, Т25, ТЗО, Т40, Т45, Т50, Т55 L=75 mm. - Т20, Т25, ТЗО, Т40, Т45, Т50, Т55.
SPLINE: L=30 mm - М5,М6,М8,М10,М12, L=75 mm — М5,М6,М8,М10,М12.
Material — tool steel S2.
Coating - phosphatizing.
Packaging - plastic case.

Stock: 0 pcs.

Gaisa pūšamā pistole

BLOW OFF GUN
It is used for removing dirt from units and mechanical device by compressed air flow.
It is eqquiped with quick connector.

Stock: 0 pcs.

Riepu pumpēšanas pistole

PRESSURE GAUGE 10 ATM WITH HOSE
Membrane-type pressure gage with scale in psi and bar.
It is used to display and test the pressure of non-aggressive and not crystallising fluids (liquids, gases).
It can be used for tire pressure monitoring.
It is protected against mechanic damage with rubber cover.
The range of measured pressure from 0.05 to 12 MPa.
Accuracy class — 5,0.
Body diametr — 65 mm.

Stock: 0 pcs.

Kombinēta atslēga

Spanner is made by the hot stamping method (forging hammers).
Has a standard open end profile and 12 point box end profile.
Material – chrome-vanadium tool steel CRV6150.
Protected from corrosion by chrome coating with matt surface effect.

Stock: 0 pcs.

Eļļotājs

OIL CAN 300ML METAL (FLEXIBLE END)
Used for oiling friction units with liquid lubricants which do not require supply under pressure.
Equipped with spout.

Stock: > 1 pcs.

Drive socket

Stock: 0 pcs.