Auto chemicals

Bremžu suportu krāsa

Brake Caliper Yellow 400ml
Paint to highlight brake pads.

Good filling properties and a lasting gloss.
Scratch free, shock proof and resistant to petrol, chemicals and weather influences, is rust and dirt preventive.
MoTip Brake Caliper Spray is available in four colours.

Stock: > 1 pcs.

Motoreļļa

Synthetic engine oil for vehicles with and without exhaust aftertreatment.
It is a high performance, low SAPS, fuel-saving engine oil designed for modern passenger car gasoline and diesel engines, especially suitable for diesel engines with particulate filters.
This oil is classified as ACEA C1, which requires an even greater reduction in ash, phosphorus and sulfur than in categories C2 and C3.
The introduction of EURO 4 and subsequent emission standards for passenger car engines led to the development of new engines and emission control systems, which also required the development of new generation engine oils. To meet these exhaust standards, engines are equipped with diesel particulate filters (DPF).
These exhaust gas monitoring systems must perform their function reliably over a very long period of operation, and engine oil components must not fail.
To meet these requirements, new engine oils have been developed with a lower content of sulphated ash, phosphorus and sulfur (low SAPS).
Low ash technology keeps the engine and particulate filter clean and significantly reduces particulate emissions.
ACEA C1 motor oils must contain no more than 0.5% sulfated ash, 0.5% phosphorus and 0.2% sulfur.
Characteristics and properties
• High ash reduction keeps the particulate filter clean.
• Low phosphorus and sulfur content extends the life of gasoline engine catalytic converters.
• Best wear protection and excellent oxidation resistance.
• Special viscosity index improvers give this engine oil absolute stability in displacement.
• High viscosity HTHS low viscosity engine oil with low friction to reduce fuel consumption and CO2 emissions.
Application
Fuel-saving engine oil produced with the latest low SAPS technology, especially suitable for diesel engines with or without a particulate filter, as well as for modern gasoline engines in passenger cars.
An engine oil of this quality can only be used if it meets the ACEA C1, A5/B5 or A1/B1 specifications, for example in many Mazda engines.
This engine oil may not be used in all engines.
Follow manufacturer's specifications and instructions before use
Specification/performance level
• ACEA 2016: C1
• ACEA 2007: A5/B5
• JASO DL-1

Stock: > 1 pcs.

Motor oil

Stock: > 1 pcs.

Transmission oil

Textile floor mats - made from special auto textile material. Good protection from dust and

Stock: > 1 pcs.

Car wash complect

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor s

Stock: 0 pcs.

Elektronikas un kontaktu tīrīšanas līdzeklis SONAX

Electronics and contact cleaner SONAX, 400ml.
SONAX electronic and contact cleaner highly active, extremely fast evaporating special cleaner for cleaning electronic contacts, plugs and other electrical components.
Removes dirt, oil, silicone residue and aging-related oxidation from all contact surfaces.
Leaves a corrosion protective film. Guaranteed uninterrupted flow of electricity. Compatible with plastic.

Stock: > 1 pcs.

Īpaši mīksta pulēšanas ripa SONAX

Very soft SONAX polishing pad, grey.
SONAX Polishing Pad is an anti-hologram polishing pad (very soft) for fine polishing and removing holograms.
Designed for rotary polishers when using Sonax Profiline products.
Fastened with Velcro, which allows you to quickly change.
Diameter 160 mm.

Stock: > 1 pcs.

Motoreļļa

Синтетическое топливосберегающее моторное масло для автомобилей с системой нейтрализации отработавших газов и без нее.
Синтетическое моторное масло для современных бензиновых и дизельных двигателей легковых автомобилей. Это идеальное сочетание высокой производительности и защиты окружающей среды.
Из-за ужесточения норм выбросов повысились требования производителей двигателей к маслам с очень низкой вязкостью — и в то же время к постоянным или улучшенным смазывающим свойствам.
Этот продукт обеспечивает пониженные значения трения, что обеспечивает улучшенную экономию топлива.
Состав «Low SAPS» помогает снизить выбросы загрязняющих веществ, одновременно защищая двигатель и дизельные сажевые фильтры (DPF).
Синтетические базовые масла, используемые в этом продукте, вместе с высококачественными присадками обеспечивают чрезвычайно долгий срок службы и надежность.

Характеристики и свойства
• Улучшает работу двигателя и снижает расход топлива и выбросы.
• Отличное состояние для холодного пуска даже при очень низких температурах.
• Надежная смазка в любых условиях гарантирует высокую защиту от износа.
• Высокая защита от окисления и отложений благодаря новейшим технологиям присадок.

Использовать
SAE 0W-20 — это специальное моторное масло, разработанное для современных высокопроизводительных автомобилей с низким уровнем выбросов и может использоваться как в SAE 0W-20, так и в SAE 5W-20.
Это моторное масло особенно подходит для двигателей нового поколения ведущих японских производителей автомобилей (Toyota, Honda, Subaru, Mazda и др.).
Перед использованием следуйте спецификациям и инструкциям производителя.

Технические характеристики/уровень производительности
• ACEA C2
• API SN, SM/CF
• FIAT 9.55535-DSX - уровень

Stock: > 1 pcs.

Transmisijas eļļa

Synthetic transmission oil for automatic transmissions - with multifunctional technology
Synthetic transmission oil for automatic transmissions based on specially selected oils and additives, for use in modern automatic transmissions, especially in GM Group (Opel) cars.
This product complies with the latest DEXRON-VI specifications and meets the requirements of DEXRON-II and DEXRON-III as it is fully top-down compatible.

Characteristics and properties
• Long product life allows even longer oil change intervals than DEXRON-IIIH.
• Improves the efficiency of new and old GM automatic transmissions.
• Excellent oxidation and thermal stability prevents the formation of sludge and sediment.
• Optimal performance and wear protection at all operating temperatures
• Lower viscosity ensures optimum cold start and fuel economy
• Optimal performance and smooth shifting throughout the life of the vehicle.
Use
General Motors for automatic transmissions according to DEXRON VI and previous specifications (DEXRON III and II) as they are fully top-down compatible.

NOT suitable for continuously variable transmissions and dual-clutch transmissions.

Follow the manufacturer's specifications and instructions before use.

Specifications:
• DEXRON®-VI exceeds: DEXRON-II D and III
• FORD MERCON® LV

Stock: > 1 pcs.

Bampera krāsa

Bumper Spray Dark Grey 400ml
Excellent coverage and adhesion to repair and embellish plastic bumpers, maintaining the original bumper structure
Lasting colour and lasting gloss.
Scratch free, shock proof and is resistant to chemicals and weather influences.

Stock: 0 pcs.

Motoreļļa

Fully synthetic high performance engine oil for 4-stroke motorcycle engines
This product is made of high-quality base oils and additives, guarantees very good stability in high temperature conditions, as well as optimal lubrication. Suitable for wet clutch.
Characteristics and properties
• Fully synthetic composition with particularly high resistance to oxidation.
• Excellent engine and transmission wear protection.
• High protection against sediment and black mud.
• Optimal high temperature lubrication.
• Reduced wear when starting a cold engine due to very good low temperature properties.
• Suitable for wet clutches
Use
Fully synthetic high-performance lubricant, suitable for use in all air-cooled and water-cooled 4-stroke motorcycle engines, specially designed for optimal lubrication even at high loads.
Follow the manufacturer's specifications and instructions before use.
Specifications / Performance level
• API SM, SL, SJ, SH, SG
• JASO MA 2

Stock: > 1 pcs.

Motoreļļa

High performance synthetic motor oil
Fuel-efficient, high-tech engine oil developed according to the latest technologies. Developed with the latest additives in combination with high-performance synthetic components, this lubricant meets the most stringent requirements of ACEA standards for petrol and diesel passenger cars without a diesel soot filter (DPF).
This engine oil, the most important feature of which is absolute stability in relation to the displacement, allows to increase the intervals between oil changes.
Characteristics and properties
• Exceeds the highest requirements of ACEA standards.
• Special additives to increase the viscosity index provide this engine oil with absolute shear stability.
• Reduces mechanical friction and reduces emissions by reducing fuel consumption.
• Optimum performance for fast engine lubrication at low temperatures when starting the engine cold.
• Best protection against wear in all operating conditions.
• Improved engine cleanliness due to excellent cleaning and dispersing properties.
• Reduced oil consumption due to low evaporation losses.

Use
This high-performance engine oil is designed to meet the stringent requirements of various manufacturers and is therefore suitable for a wide range of applications.
For use in low emission petrol engines. With or without turbocharger, with multi-valve technology as well as in passenger car diesel engines, including direct injection, with direct fuel injection (Common Rail) and turbocharger
This product must not be used in diesel engines with a diesel soot filter (DPF).
Follow the manufacturer's specifications and instructions before use.

Specifications / Performance level
• ACEA A3 / B4
• API SN, SM / CF
• MB 229.5, 226.5
• VW 502 00, 505 00
• Porsche A40
• GM-LL-A-025 / B-025
• Renault RN0700 / 0710 BMW LL-01 level
• JASO MA2 level
• PSA B71 2296 level
• FIAT 9.55535-D2, G2, M2, N2, T2, Z2 level

Stock: > 1 pcs.

Transmisijas eļļa

Automatic Transmission Fluid (ATF)
Semi-synthetic fluid for automatic transmissions and power steering of cars and trucks. It is formulated with high quality base oils and special additives to ensure friction and shift performance requirements, especially for Dexron-III H and other manufacturers' specifications.
Characteristics and properties
• Excellent thermal and oxidation stability to prevent the formation of sludge and sediment.
• Effective protection against wear and corrosion
• very good low temperature flow for efficient cold start performance as well as reliable protection against high temperature degradation
• Excellent friction and gear shifting properties.

Use
For use in automotive, truck, bus automatic transmissions and power steering hydraulic fluids that require transmission fluid with the following characteristics.
Follow the manufacturer's specifications and instructions before use.

Specifications
• DEXRON® - III H
• FORD MERCON®
• LEVEL
• ALLISON C-4
• MB 236.1, 236.5, 236.6, 236.7, 236.9, 236.10
• MAN 339 Typ Z-1, Type V-1
• ZF TE-ML 02F, 03D, 04D, 05L, 09, 11A, 11B, 14A, 14B, 16L, 17C, 21L
• CATERPILLAR TO-2
• VOITH H55.6335, H55.6336
• VOLVO 97341, 97340

Stock: > 1 pcs.

Vējstiklu koncentrēts šķidrums

Concentrated summer windshield fluid DR.WACK, 250 ml
It is a top quality product, very concentrated.
To obtain the finished windshield fluid, it is necessary to dilute with water in a ratio of up to 1: 200.
Convenient to use, its packaging takes up very little space, 50L of finished windshield fluid can be obtained from one 250ml bottle.
The product is environmentally friendly, all raw materials meet strict EU requirements, is not harmful to windshield and headlight washing systems, rubber, polycarbonate and body varnish coating.

Stock: > 1 pcs.

Auto vasks

Original car wax, 500 ml, Turtle Wax

Easy-to-use car wax, which provides the so-called 'hard shell' effect. Wax is safe for all painted surfaces - both new and old, is a unique mixture of cleaners and waxes that removes dirt and soot, improves the appearance of your car, providing long-term protection against precipitation.

TURTLE TIPS: If the car paint has scratches and fine scratches, first use RENEW POLISH to remove them. The product will be difficult to use in direct sunlight or on hot paint. Do not use if the lacquer layer is damaged. Avoid contact with glass and trim.

USE:
1. Make sure the paint is clean and dry, shake the bottle well.
2. Treat the surface in parts, pour the wax on a clean cloth and apply it in a circular motion.
3. Allow to dry until spray forms, then wipe with a clean, soft cloth.
4. Apply a little to make the surface shiny.

Stock: 0 pcs.

Melna matēta krāsa

MATTE BLACK COLOR (Ae 450ml), Concept
Durable, acrylic paint developed using the latest technology.
Excellent and durable coating: the ingredients in it contain a more durable coating and give a matte look. USAGE: easy to apply, quick-drying.
SURFACE PREPARATION: Lightly treat the surface with damp or dry fine sandpaper. Make sure the surface is clean and dry, free of dirt, oil, wax, etc. stains. The metal surface must be pre-treated with primer. APPLICATION: Shake the spray vigorously, continue to shake for another 2 minutes after you hear the balls move in the spray. Spray the spray from a distance of 25-30 cm, apply several thin coats of coating. Observe a 10-minute break between each subsequent coat. Allow the surface to dry for 24 hours until the coating has completely hardened. After use, turn the spray upside down and spray to clean the spray nozzle.

Stock: 0 pcs.

Krāsa melna

SATIN MATTE BLACK COLOR (Ae 450ml), Concept
Durable, acrylic paint developed using the latest technology.
Excellent and durable coating: the ingredients in it contain a more durable coating and give a matte look. USAGE: easy to apply, quick-drying.
SURFACE PREPARATION: Lightly treat the surface with damp or dry fine sandpaper. Make sure the surface is clean and dry, free of dirt, oil, wax, etc. stains. The metal surface must be pre-treated with primer. APPLICATION: Shake the spray vigorously, continue to shake for another 2 minutes after you hear the balls move in the spray. Spray the spray from a distance of 25-30 cm, apply several thin coats of coating. Observe a 10-minute break between each subsequent coat. Allow the surface to dry for 24 hours until the coating has completely hardened. After use, turn the spray upside down and spray to clean the spray nozzle.

Stock: 0 pcs.

Buferu krāsa

GREY BUFFER COLOR (AE 450ML), CONCEPT

It is a solution offered by manufacturers for restoring the color of colored plastic and vinyl surfaces. Removes stains on buffers: easily, simply and quickly removes white stains and deposits on buffers. Does not create clutter: the product has all the best properties of aerosol-shaped products - always ready to use, easy to apply, does not cause clutter and clutter, can only be used as needed and stored until the next use. Extremely flexible: also suitable for vinyl coating.
SURFACE PREPARATION: It is very important to carry out the preparation properly by carefully and thoroughly cleaning the plastic surface. Clean the surface of wax, silicones, deposits, etc. Lightly treat the surface with fine sandpaper. APPLICATION: Shake the spray vigorously, continue to shake for another 2 minutes after you hear the balls move in the spray. Spray the spray from a distance of 25-30 cm, apply several thin coats of coating. Observe a 10-minute break between each subsequent coat. Allow the surface to dry for 24 hours until the coating has completely hardened. After use, turn the aerosol can upside down and spray to clean the spray nozzle.

Stock: > 1 pcs.

Cinka pārklājums

Zinc coating (Ae 450ml)
The product is intended for professional use only.
MULTIFUNCTIONAL: Zinc Galv is suitable both as a primer and as a coating for various manufacturing, maintenance and construction industries.
FOR WELDING: The substances in the composition ensure efficient treatment of joints and joints before welding.
ANTI-RUST AGENT: Used as a coating that reduces steel and iron parts such as pipes, slabs, etc. rusting.
VERSATILE: Can be applied to acrylic or cellulose paints (do not spray on alkyd paint, as it may shrink). It can be repainted with acrylic, cellulose, epoxy and alkyd paints.
NOTE: Zinc life cycle on surfaces 9 months.
APPLICATION: Make sure that the surface to be treated is clean, dry and free from dust, oil, wax and the like. Shake the spray vigorously for another 2 minutes after you can hear the balls moving in the spray. Spray the spray from a distance of 25-30 cm, apply several thin coats of coating. Allow the surface to dry for 2 hours until the coating is completely hardened before applying the paint.
AFTER USE: Invert the spray and spray to clean the spray nozzle.

Stock: 0 pcs.

Smērviela PTFE

PTFE grease - MA PROFESSIONAL - 400 ml.
Professional tool with very good lubricating properties.
The PTFE particles in its composition effectively adhere to metals, reducing friction and increasing corrosion resistance.
Resistant to salt and water.
Effective even at temperatures from -40°C to +180°C.
A special applicator ensures precise application.

Stock: > 1 pcs.