Reverse signal
Reverse signal 12-36V 110 dB
DESCRIPTION
Acoustic reversing signal universal, it can be mounted to cars, trucks, agricultural machinery, forklifts, excavators, loaders.
Power supply: 12-36V
Sound power: 110 dB
Dimensions:
- base length 10,5 cm
- base width 4,5 cm
- height 6,5 cm
Stock:
> 1 pcs.
|
|
|
|
|
Parkošanās sensors
Code 01567.
Parking sensor kit with buzzer.
Product description-
-4 black detectors (sensors),
-sound buzzer.
-special drill for drilling holes in the bumper.
-installation instructions.
The buzzer can work in 3 sound modes: high, low and completely muted, the mode can be changed with a switch on the case.
A parking sensor is a device that helps you park your vehicle. It works on the principle of sonar - it emits ultrasonic waves, which, being reflected from the obstacle, allow you to determine the distance between the car and the obstacle. When reversing, the device correctly detects obstacles in the vehicle's path and warns the driver with an audible signal.
Full specification:
Working range / sensitivity -0-2.5 m.
Power - 12V
Working frequency is 40 kHz.
Working temperature -30 ° С - + 70 ° С.
Mounting diameter-22mm.
Weight 0.734 kg.
Stock:
> 1 pcs.
|
|
|
|
|
Parkošanās sensors
Code 01576.
Parking sensor kit with buzzer.
Product description-
-4 black detectors (sensors),
-sound buzzer.
-special drill for drilling holes in the bumper.
-installation instructions.
The buzzer can work in 3 sound modes: high, low and completely muted, the mode can be changed with a switch on the case.
A parking sensor is a device that helps you park your vehicle.
It works on the principle of sonar - it emits ultrasonic waves, which, being reflected from the obstacle, allow you to determine the distance between the car and the obstacle.
When reversing, the device correctly detects obstacles in the vehicle's path and warns the driver with an audible signal.
The sensors in the 'GOLD' version are smaller than the standard ones and have a sealed connector on the cable, thanks to which we can disconnect the sensors from the car when installing or removing the bumper.
Full specification:
Working range / sensitivity -0-2.5 m.
Power - 12V
Working frequency is 40 kHz.
Working temperature -30 ° С - + 70 ° С.
Mounting diameter-18mm.
Weight 0.734 kg.
Stock:
0 pcs.
 |
|
|
|
|
Parkošanās sensors
Code 01565.
A parking sensor 01565 is a device that helps you park your vehicle. It works on the principle of sonar - it emits ultrasonic waves, which, being reflected from the obstacle, allow you to determine the distance between the car and the obstacle. When reversing, the device correctly recognizes obstacles in the path of the car and warns the driver with a sound signal.
The LED display shows the distance to the obstacle with an accuracy of tenths of a meter. It also has a built-in loudspeaker (buzzer), with the ability to completely mute the sound with a switch on the case.
Display size: 10 x 2 x 3 cm
Cable length: ~ 5 m.
The kit includes:
-4 black detectors.
-LED display with built-in buzzer
-4 touch control unit
- a saw for drilling holes in the bumper.
-installation instructions.
Full specification:
Working range / sensitivity -0-2.5 m
Power supply-12V.
Working frequency -40 kHz.
Working temperature -30 ° C - + 70 ° C.
Mounting diameter - 22 mm.
Stock:
> 1 pcs.
|
|
|
|
|
Parkošanās sensors
Code 02279.
Product description
The parking sensor is a device that supports parking and reversing. It works on the principle of sonar - it emits ultrasonic waves, which, when reflected from an obstacle, allow you to determine the distance between the car and the obstacle. When reversing, the device correctly detects obstacles in the vehicle's path and warns the driver with an audible signal.
The LED display shows the distance to the obstacle with an accuracy of tenths of a meter. There is also a built-in loudspeaker (buzzer), warning with the ability to completely mute the sound using a switch on the case.
Display size: 10 x 2 x 3 cm
Cable length: ~ 5 m
Parking sensor black external TRUCK. It has a mounting bracket bolted to the bumper. Can be used without support for rounded bumpers.
Sensor dimensions: 63 x 30 x 32 mm
The kit includes:
4 black 19 mm TRUCK detectors
LED display with built-in buzzer
4-touch control unit
Installation instructions
Full specification:
Working range / sensitivity
0-2.5 m
Power
12 in
Working frequency
40 kHz
Working temperature
-30 ° С - +70 ° С
Stock:
> 1 pcs.
 |
|
|
|
|
Parking sensor
Stock:
> 1 pcs.
|
|
|
|
|
Parking sensor
Stock:
> 1 pcs.
|
|
|
|
|
Parkošanās sensors
Code 02737.
TRUCK parking sensor kit with HD-315-LED camera.
Parking sensors and camera are activated automatically when reverse gear is engaged.
Parking sensors are an indispensable assistant both while driving and when parking a car. They make it easy to park even a large car, and the rear view camera allows you to accurately observe the area behind the vehicle.
The device is especially useful in crowded parking lots, in rain or snow, and in conditions of limited visibility, such as at night.
By determining the distance and direction from the obstacle, we can avoid unnecessary expenses and a lot of trouble caused by the slightest scratches on the bumper.
Package included:
- 4 black sensors TRUCK, 19 mm,
- rear view camera HD-315-LED,
- LCD 4.3' display, foldable,
- electrical installation.
Stock:
> 1 pcs.
|
|
|
|
|
Parkošanās sensors
Code 02703.
Set of parking sensors GOLD with HD-501-IR camera.
Parking sensors and camera are activated automatically when reverse gear is engaged.
Parking sensors are an indispensable assistant both while driving and when parking a car. They make it easy to park even a large car, and the rear view camera allows you to accurately observe the area behind the vehicle.
The device is especially useful in crowded parking lots, in rain or snow, and in conditions of limited visibility, such as at night.
By determining the distance and direction from the obstacle, we can avoid unnecessary expenses and a lot of trouble caused by the slightest scratches on the bumper.
Package included:
- 4 black sensors GOLD, 18 mm,
- rear view camera HD-501-IR,
- LCD display 4.3', folding,
- electrical installation.
Stock:
> 1 pcs.
|
|
|
|
|
Parkošanās sensors
Code 02712.
Set of parking sensors withHD-501-IR camera, inside mount .
Parking sensors and camera are activated automatically when reverse gear is engaged.
Parking sensors are an indispensable assistant both while driving and when parking a car. They make it easy to park even a large car, and the rear view camera allows you to accurately observe the area behind the vehicle.
The device is especially useful in crowded parking lots, in rain or snow, and in conditions of limited visibility, such as at night.
By determining the distance and direction from the obstacle, we can avoid unnecessary expenses and a lot of trouble caused by the slightest scratches on the bumper.
Package included:
- 4 black sensors, inside mount, 16.5 mm,
- rear view camera HD-501-IR,
- LCD display 4.3', folding,
- electrical installation.
Stock:
> 1 pcs.
|
|
|
|
|
Parkošanās sensors
Code 02713.
Set of parking sensors withHD-502-IR camera, inside mount .
Parking sensors and camera are activated automatically when reverse gear is engaged.
Parking sensors are an indispensable assistant both while driving and when parking a car. They make it easy to park even a large car, and the rear view camera allows you to accurately observe the area behind the vehicle.
The device is especially useful in crowded parking lots, in rain or snow, and in conditions of limited visibility, such as at night.
By determining the distance and direction from the obstacle, we can avoid unnecessary expenses and a lot of trouble caused by the slightest scratches on the bumper.
Package included:
- 4 black sensors, inside mount, 16.5 mm,
- rear view camera HD-502-IR,
- LCD display 4.3', folding,
- electrical installation.
Stock:
> 1 pcs.
|
|
|
|
|
Parkošanās sensors
Code 02704.
Set of parking sensors GOLD withHD-502-IR camera.
Parking sensors and camera are activated automatically when reverse gear is engaged.
Parking sensors are an indispensable assistant both while driving and when parking a car. They make it easy to park even a large car, and the rear view camera allows you to accurately observe the area behind the vehicle.
The device is especially useful in crowded parking lots, in rain or snow, and in conditions of limited visibility, such as at night.
By determining the distance and direction from the obstacle, we can avoid unnecessary expenses and a lot of trouble caused by the slightest scratches on the bumper.
Package included:
- 4 black sensors GOLD, 18 mm,
- rear view camera HD-502-IR ,
- LCD display 4.3', folding,
- electrical installation.
Stock:
> 1 pcs.
|
|
|
|
|
Parking camera
Stock:
> 1 pcs.
|
|
|
|
|
Atpakaļskata kamera ar monitoru
Rear view camera ZCB-30146 + 7-inch diagonal monitor.
The camera is automatically activated when reverse gear is engaged.
In this case, the kit includes a Bluetooth transmitter (transmitter), which allows you to use the camera and monitor without connecting wires to each other.
Designed for trucks, buses and cars.
Built-in high quality IR diodes.
The camera is compatible with any monitor with an RCA video input.
The camera can be rotated vertically. The lens is made using Anti-Fog technology.
The camera image has intuitive guide lines that make parking easier.
The camera is waterproof and shockproof - IP67.
The advantage of the TFT matrix is very good visibility of objects on the screen even in very bright sunlight.
The monitor is suitable for any image transmitter with an RCA (Cinch) output.
The kit includes the necessary wires to mount the camera.
Parking a car in reverse is often a real challenge, especially in difficult terrain where visibility is very limited or there is very little space in the allocated parking space. In the case of vans, this task is even more difficult. The camera will provide each driver with an almost complete view of the space behind the car, and the ability to adjust the camera vertically will allow you to adjust the viewing angle as needed.
Stock:
0 pcs.
 |
|
|
|
|
Atpakaļgaitas signāls
Reverse signal 12-36V 110 dB
DESCRIPTION
he device will be perfect when the weather conditions are bad. The signal will ensure safety when reversing. Characteristic: 12V or 24V DC power supply, Acoustic signal 85dB. Mounting: Should be mounted near the rear reflector, with the speaker facing the rear of the vehicle. When attaching, connect the red (+) wire to the reverse light positive wire and the black (-) wire to the vehicle body or reverse light negative wire.
Stock:
> 1 pcs.
|
|
|
|
|
