Lighting and lamps

DT savienotāja spraudnis

Code 1605-N8K052
DT connector plug (0.5-1.5 mm2).
- 3-cont.

Stock: > 1 pcs.

Vadu komplekts papildlukturiem

LB0062-2.
Wiring harness for connecting 2 work lights and LED panels.
They are equipped with a switch, a connection socket, a 12 V relay and a fuse.
Options:
- Wire length: 2x 2.5 m.
- Maximum light power: 120W.
- Voltage: 12V.
- Relay: 12V, 40A.
- Fuse: 30A.

Stock: > 1 pcs.

LAZER CAN contactless reader

Stock: > 1 pcs.

El.vadi

A set of electrical wires for connecting 2 Lazer LED spotlights with built-in position lights, code LAZER 2L-LP-PL-120.
Included:
- Relay 12 V (in a waterproof case).
- Fuse 30 A,
- Flexible cable 1.2 m long.
It has a battery terminal on one end and an optional headlight on/off switch that needs to be installed inside the car.
The relay holder meets the IP53 standard when installed in a vertical position.
The product is specially designed for Lazer LED lights.
Compatible with:
Triple R 750 (Generation 2)
Triple R 850 (Generation 2)
Triple R 1000 (Generation 2)
Triple R 1250 (Generation 2)
Linear-12 Elite (with position light)
Linear-18 Elite (with position light)
Sentinel (standard with position light).

Stock: 0 pcs.

El.vadi

1605-WK069.
Powerful wiring kit for connecting one additional lamp.
Suitable for OPTIBEAM SUPER CAPTAIN RAGE and DUAL 800 lamps.
Package included:
- Relay 12V 60A - 1 pcs.
- Relay 24V 40A - 1 pcs.
- Fuses: 30A - 1 pcs., 50A - 1 pcs.
- Couplings - 2 pcs.
- Coupling collars - 2 pcs.

Stock: > 1 pcs.

El.vadi

Electrical wires 1L - LP-120.
Rated voltage: 12V
Number of headlights: 1
For model: LAZER ST-Range, Triple-R Elite (Gen2), Linear.
The kit includes:
- 12V relay (in a waterproof case),
- fuse 20A,
- a terminal for connecting the battery at one end,
- 1.2 m cable for connecting the headlight,
- an additional switch for turning on / off the independent operation of the high beam.
Allows the use of LED Lazer lamps either in parallel with standard vehicle lighting or via an independent switch that can be installed inside your vehicle.
Compatible with:
ST Evolution (All Products)
Triple-R 750 Elite (Gen2)
Triple-R 850 Elite (Gen2)
Triple-R 1000 Elite (Gen 2)
Linear-6 (Std / Elite)
Linear-12 (Std / Elite)
Linear-18 (Std / Elite)
Linear-36
Linear-42
Linear-48

Stock: 0 pcs.

El.vadi

1605-WK045 - set of wires for connecting two additional lights.
- Voltage: 12/24 V
- Max.12V 2x150W, 24V 2x300W.
- 4-pin DT-4 connector.
- CAN compatible.
- Protected from corrosion.
- Fully electronic structure, replaces fuse and relay.
- Built-in current leakage protection.
- Also works in cars where current is supplied to the headlights in pulses.

Stock: > 1 pcs.

Slēdzis

Switch KE/RO/3F.
- ON-OFF-ON, fixed.
- 3-pin.
- 10 A/250 V AC.
- Ø19.8 mm,
- SP3T.
- Round, black in color.

Stock: > 1 pcs.

El.vadi

Electrical wires 1L - LP-220.
- Rated voltage: 12V
- Number of lights: 1
- 2-pin Superseal connector.
Package Included:
- 12V relay (in a waterproof case),
- fuse 20A,
- terminal for connecting the battery at one end,
- cable 3 m long for connecting the headlight,
- a light on/off switch that can be installed inside the car.
The product is specially designed for Lazer LED headlights.
Compatible with:
ST Evolution (all products)
Triple-R 750 Elite (2nd generation)
Triple-R 850 Elite (Gen2)
Triple-R 1000 Elite (2nd generation)
Linear-6 (Standard/Elite)
Linear-12 (Standard/Elite)
Linear-18 (Standard/Elite)
Linear-36
Linear-42
Linear-48
Sentinel 7 inches,
Sentinel 9 inches Elite

Stock: > 1 pcs.

DT savienotāja rozete

Code 1605-N8K093
DT connector socket (2-3 mm2).
- 4-cont.

Stock: > 1 pcs.

DT savienotāja spraudnis

Code 1605-N8K093
DT connector plug (2-3mm2).
- 4-cont.

Stock: > 1 pcs.

Slēdzis

The switch with the control indicator of 12 volts.
-green

Stock: 0 pcs.

LED gabarīta lukturis

LED clearance lamp 12-36V, white with self-adhesive tape and 0,5 m wire.
1-functional LED lamp – low power consumption

- ElectroMagnetic Compatibility – EMC certificate
- shock-resistance – PC lampshade
- optional polarity connection
- lamp is equipped with 2x075 mm2 wire, 0,5m lenght.
- the vertical and horizontal assembly is possible by means of double-sided tape or/and two screws.

The FT-195 LED lamp video

Lamp functions:
- position front light (FT-195 B LED)
- postion rear light (FT-195 C LED)
- positon side light (FT-195 Z LED)
- application: trailers, semi-trailers, special vehicles and others

Lamp parameters:
Universal supply voltage: 12-36V DC
Operating temperature: –40°C do +55°C
Lamp is resistant to any weather conditions
Lamp is fully airthight

Power consumption:
- 12V/24V = 0,08A/0,08A (FT-195 B LED)
- 12V/24V = 0,025A/0,025A (FT-195 C LED)
- 12V/24V = 0,05A/0,05A (FT-195 Z LED)

Power consumption (rated power):
- 12V/24V = 1W/2W (FT-195 B LED)
- 12V/24V = 0,3W/0,6W (FT-195 C LED)
- 12V/24V = 0,6W/1,2W (FT-195 Z LED)

Stock: > 1 pcs.

LED gabarīta lukturis

LED clearance lamp 12-36V, yellow with self-adhesive tape and 0,5 m wire.
1-functional LED lamp – low power consumption

- ElectroMagnetic Compatibility – EMC certificate
- shock-resistance – PC lampshade
- optional polarity connection
- lamp is equipped with 2x075 mm2 wire, 0,5m lenght.
- the vertical and horizontal assembly is possible by means of double-sided tape or/and two screws.

The FT-195 LED lamp video

Lamp functions:
- position front light (FT-195 B LED)
- postion rear light (FT-195 C LED)
- positon side light (FT-195 Z LED)
- application: trailers, semi-trailers, special vehicles and others

Lamp parameters:
Universal supply voltage: 12-36V DC
Operating temperature: –40°C do +55°C
Lamp is resistant to any weather conditions
Lamp is fully airthight

Power consumption:
- 12V/24V = 0,08A/0,08A (FT-195 B LED)
- 12V/24V = 0,025A/0,025A (FT-195 C LED)
- 12V/24V = 0,05A/0,05A (FT-195 Z LED)

Power consumption (rated power):
- 12V/24V = 1W/2W (FT-195 B LED)
- 12V/24V = 0,3W/0,6W (FT-195 C LED)
- 12V/24V = 0,6W/1,2W (FT-195 Z LED)

Stock: > 1 pcs.

LED gabarīta lukturis

LED clearance lamp 12-36V, white with reflector and 0,5 m wire. The lamp meets ADR requirements.
2-functional LED clearance lamp – low power consumption
- european E9 homologation
- ElectroMagnetic Compatibility – EMC certificate
- shock-resistance – PC lampshade
- optional polarity connection
The lamp meets ADR requirements.

The FT-070 LED lamp video

The unique lamp construction solution which increases air-tightness and the light and electronic components resistance to any external conditions.
The revolutionary system of assembly – there are no visible signs of joining bodywork with lamp surface.
The lamp is available in two versions and presents a revolutionary light emission system which goes along with an innovative design. This combination procures that with the highest probability our lamp is the most recognizable and eye-catching product on the market.


Lamp functions:
rear clearance light with reflector
front clearance light with reflector
side clearance light with reflector

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
12V/24V=0,08A/0,08A

Power consumption / Rated power:
12V/24V = 1,0W/2,0W

Stock: > 1 pcs.

LED gabarīta lukturis

LED clearance lamp 12-36V, red with reflector and 0,5 m wire. The lamp meets ADR requirements.
2-functional LED clearance lamp – low power consumption
- european E9 homologation
- ElectroMagnetic Compatibility – EMC certificate
- shock-resistance – PC lampshade
- optional polarity connection
The lamp meets ADR requirements.

The FT-070 LED lamp video

The unique lamp construction solution which increases air-tightness and the light and electronic components resistance to any external conditions.
The revolutionary system of assembly – there are no visible signs of joining bodywork with lamp surface.
The lamp is available in two versions and presents a revolutionary light emission system which goes along with an innovative design. This combination procures that with the highest probability our lamp is the most recognizable and eye-catching product on the market.


Lamp functions:
rear clearance light with reflector
front clearance light with reflector
side clearance light with reflector

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
12V/24V=0,08A/0,08A

Power consumption / Rated power:
12V/24V = 1,0W/2,0W

Stock: > 1 pcs.

LED gabarīta lukturis

LED clearance lamp 12-36V, yellow with reflector and 0,5 m wire. The lamp meets ADR requirements.
2-functional LED clearance lamp – low power consumption
- european E9 homologation
- ElectroMagnetic Compatibility – EMC certificate
- shock-resistance – PC lampshade
- optional polarity connection
The lamp meets ADR requirements.

The FT-070 LED lamp video

The unique lamp construction solution which increases air-tightness and the light and electronic components resistance to any external conditions.
The revolutionary system of assembly – there are no visible signs of joining bodywork with lamp surface.
The lamp is available in two versions and presents a revolutionary light emission system which goes along with an innovative design. This combination procures that with the highest probability our lamp is the most recognizable and eye-catching product on the market.


Lamp functions:
rear clearance light with reflector
front clearance light with reflector
side clearance light with reflector

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
12V/24V=0,08A/0,08A

Power consumption / Rated power:
12V/24V = 1,0W/2,0W

Stock: > 1 pcs.

LED clearance lamp

Red LED clearance lamp 12-30 V, right with reflector, mounting holder and wire harness.
European E9 homologation
ElectroMagnetic Compatibility – EMC certificate
Shock-resistance – PC lampshade
Optional polarity connection

Lamp functions:
- rear clearance light with reflector
- front clearance light with reflector
- side clearance light with reflector

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
- white or yellow light 12V/24V = 0,04A/0,04A
- red light 12V/24V = 0,03A/0,03A

Rated power:
- white or yellow light 12V/24V = 0,5W/1W
- red light 12V/24V = 0,4W/0,8W

Stock: > 1 pcs.

LED gabarīta lukturis

Yellow LED clearance lamp 12-30V with reflector, mounting holder and wire harness.
European E9 homologation
ElectroMagnetic Compatibility – EMC certificate
Shock-resistance – PC lampshade
Optional polarity connection

Lamp functions:
- rear clearance light with reflector
- front clearance light with reflector
- side clearance light with reflector

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
- white or yellow light 12V/24V = 0,04A/0,04A
- red light 12V/24V = 0,03A/0,03A

Rated power:
- white or yellow light 12V/24V = 0,5W/1W
- red light 12V/24V = 0,4W/0,8W

Stock: > 1 pcs.

Gabarīta lukturis LED

LED clearance marker lamp on a short straight rubber bracket with a cable.
2-functional LED clearance lamp mounted with the rubber bracket and removable opitacal module
- european E9 homologation
- ElectroMagnetic Compatibility – EMC certificate
- shock-resistance – PC lampshade
- optional polarity connection
- integrated 2x0.75 mm² cable

Lamp functions:
- white clearance light
- red clearance light

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
- 12V/24V = 0,04A/0,04A

Power consumption / Rated power:
- 12V/24V = 0,5W/1W

Stock: > 1 pcs.