Components

DT kabelis Hane

Code 1605-N8K202
DT plug with cable.
Description
• Consists of 2 cables - with a DT plug and with a corresponding DT plug
• Total length 0.5 m
• wire 2x0.75 mm²
• ADR approved

Stock: > 1 pcs.

Slēdzis

The switch with the control indicator of 12 volts.
-green

Stock: 0 pcs.

Lazer gaismas kliedētājs

The amber lenses for the Triple-R range of lights alters the standard 5000 kelvin colour temperature to ‘selective yellow’. Available either as a flat (0 degree) or reeded (15 degree) lens cover, the amber lenses are regarded as improving visibility in rain, fog, and snow conditions. The lenses are made from acrylic, and feature a gasket which helps prohibit water and dust getting between the lenses. The reeded lens is secured in place using 4 spring clips supplied with each lens.
Come supplied with 4x spring clips.

-not designed for lamps of the second generation, newer releases.

Stock: 0 pcs.

Lazer gaismas kliedētājs

The amber lenses for the Triple-R range of lights alters the standard 5000 kelvin colour temperature to ‘selective yellow’. Available either as a flat (0 degree) or reeded (15 degree) lens cover, the amber lenses are regarded as improving visibility in rain, fog, and snow conditions. The lenses are made from acrylic, and feature a gasket which helps prohibit water and dust getting between the lenses. The reeded lens is secured in place using 4 spring clips supplied with each lens.
Come supplied with 4x spring clips.
-designed only for lamps of the second generation.

Stock: 0 pcs.

El.vadi

1605-WK018
Set of wires HD Deutsch for one lamp, for connection from the battery.
Kit: relay + wiring harness.
Maximum power 300 watts.
12V relay.
Working temperature from -40C to + 150C.

Stock: 0 pcs.

Wire harness for work lamps

LB0062
WIRING HARNESS FOR LED LAMPS AND PANELS
IN VEHICLES, AGRICULTURAL AND CONSTRUCTION MACHINES, QUADRICYCLES, BOATS AND OTHER EQUIPMENT.
- The power switch has light indicators indicating on and off, the bottom of the switch is glued with adhesive tape for easy installation.
The unit is protected by a 15 A fuse.
The lamp cable has a plug suitable for most types of lamps (the plug can be cut off and any lamp available on the market can be connected to the cables).
Power Cable Length - Relay: 0.5m
Cable Length of Relay Lamp: 2m
Relay Switch Cable Length: 2.8m
The kit includes:
- complete set with connectors
- power switch with LED indicators
- 12V relay
- SEALED
- CABLE-3M
-POWER 12 V MAX. 120 watts

Stock: > 1 pcs.

El.vadi

1605-WK007
Kit for connecting LED lamps.
For fog lights or high beam.
Set-
toggle switch + 2 relays + wiring harness.
Max. power 300 W.
Relay 40A / 12V
Wires 2.0 mm.
Operating temperature -40 ... +65 C

Stock: 0 pcs.

Switch

Stock: 0 pcs.

Vadu komplekts papildlukturiem

LB0062-2.
Wiring harness for connecting 2 work lights and LED panels.
They are equipped with a switch, a connection socket, a 12 V relay and a fuse.
Options:
- Wire length: 2x 2.5 m.
- Maximum light power: 120W.
- Voltage: 12V.
- Relay: 12V, 40A.
- Fuse: 30A.

Stock: > 1 pcs.

El.vadi

1605-WK023
HD Deutsch wiring kit for two lamps for connection from a battery.
Application: auxiliary lights, daytime running lights, beacon.
Max. Power 300W.
Voltage 12V.
Operating temperature -30 ° C ... + 50 ° C.

Stock: > 1 pcs.

El.vadi

1605-WK021
HD DTP wiring kit for connecting one lamp.
Set: relay + wiring.
Maximum power 300 W.
12V relay.

Stock: > 1 pcs.

El.vadi

1605-WK019
Wiring kit for two lamps with switch.
Application: additional headlights, daytime running lights, high beams.
Maksim. power 500 watts.
Voltage 12V.
Operating temperature -40°С...+150°С.
Included:
- headlight installation wire 2.5 m with DT two-prong plug, complete set of wires for connecting from the battery to the headlights,
- relay 50A,
- fuse 50A.

Stock: 0 pcs.

El.vadi

1605-WK062.
Wiring kit for connecting one lamp.
Kit: relay, fuse and 3-pole diesel fuel.
- Fuse: 25A.
- Relay: 40A.
- Wire 2.5 mm²): 2.5 m.

Stock: 0 pcs.

El.vadi

Ideal solution for connecting two Lazer ST, Linear and Triple-R lamps (ECE approved models only). Installation is quick, easy and reliable with TE Superseal connections and no set-up procedures.
The kit is equipped with a 12V relay, 30A fuse and a battery terminal at one end.
All Lazer lamps are sold with a pre-wired female connector attached to the male connector on the lamp harness to facilitate connection to the vehicle system.

Stock: > 1 pcs.

Electrical wires

The ideal solution for wiring your Lazer ST, Linear or Triple-R lamps (ECE approved models only). The setup is quick, easy, and reliable with TE Superseal connections and no configuration procedures. The kit features a 12V relay, 20A fuse, and battery terminal at one end, and allows for the operation of specific lamps via an on/off switch which can be mounted inside your vehicles cockpit.
All Lazer lamps are sold with a pre-wired female connector attached to the male connector of the lamp harness, to facilitate wiring in to your vehicle system.

Stock: 0 pcs.

Electrical wires

Accessories for connecting LED lamps.
8250-12V-SW
Rated voltage [V]: 12
The ideal solution for installing Utility series work lamps. Includes a 12 V relay, a 10 A fuse, a battery connector at one end, a 4 m flexible cable and a switch that can be installed in the cab.

Stock: 0 pcs.

Electrical wires

The ideal solution for wiring two Lazer ST, Linear and Triple-R Lamps (ECE approved models only) on a sports bar/roof bar. The setup is quick, easy, and reliable with TE Superseal connections and no configuration procedures. The kit features a 12V relay, 30A fuse, and battery terminal at one end, and allows for the operation of two lamps via an on/off switch which can be mounted inside your vehicles cockpit.
All Lazer lamps are sold with a pre-wired female connector attached to the male connector of the lamp harness, to facilitate wiring in to your vehicle system.

Stock: > 1 pcs.

Lazer lukturu aizsargs

Made from high-tech impact-resistant and washable neoprene, the new Lazer Lamps universal LED covers are available in 5 different lamp sizes. Protected by high-strength Velcro pads, the covers are easy to install and remove.
Optimally designed covers optimized for the Triple-R series, but potentially suitable for any kind of LED light barriers, also have the advantage of significantly reducing the wind noise that may come from some of the larger lamps when installed above the windshield.

Stock: > 1 pcs.

Lazer lukturu aizsargs

Made from high-tech impact-resistant and washable neoprene, the new Lazer Lamps universal LED covers are available in 5 different lamp sizes. Protected by high-strength Velcro pads, the covers are easy to install and remove.
Optimally designed covers optimized for the Triple-R series, but potentially suitable for any kind of LED light barriers, also have the advantage of significantly reducing the wind noise that may come from some of the larger lamps when installed above the windshield.

Stock: 0 pcs.

El.vadi

1605-WK022
A set of wiring for two lamps for connection from the battery.
Application: to control car lighting.
For convenience, it has a remote control and a flash activation function.
Maxim. power 300 watts.
Voltage 12-24 V.
Operating temperature -30 ° C ... + 50 ° C

Stock: 0 pcs.